Top 10 Best monitor wall mount arm in 2021 Comparison Table
- Wide Compatibility - This Vesa mount widely fits 24 to 35 inch monitors weighing from 6.6lbs to 26.4lbs(3-12kg), compatible with Vesa 75x75, 100x100, 200x100, 200x200.
- Save Space - Instead mounted on the desktop, this wall monitor mount hold your monitor on the wall, free up much valuable space on your workstation.
- Full Motion Adjustments - This full motion articulating monitor arm allows your monitor tilt, swivel and rotate to find an optimal view angle; the built-in gas spring make the height adjustments more smooth.
- Ergonomic Riser - Raise your monitor to an ergonomic height, relieving the strain of the neck and shoulder and enhancing work efficiency.
- Easy Assembly - All the necessary instruction and hardware included; HUANUO tech support is always ready for help, welcome to your inquiry.
- Wide Compatibility 17 to 32" Monitor Wall Mount - It’s built for monitor weights from 3.3-17.6lbs and should have backside mounting holes one of the four VESA sizes: 75x75mm / 100x100mm / 100x200mm / 200x200mm.
- Premium Gas Spring Adjustment System - The built-in ultra-precision gas spring arm can smoothly adjust your monitor to any height and angle to meet your ergonomic requirements. The arm can extend up to 18.3 inches.
- Full Motion Articulating Monitor Stand - This wall monitor arm supports up-down tilt ±90°, left-right swivel 180° and 360° rotation. Provide you with more comfortable viewing angle, help to reduce neck, shoulder and back pain, work more efficiently.
- Save Space - Compared with the monitor clamped on the desk, the wall-mounted stand can save valuable space on the desktop. You don't need to worry about the bracket being close to the wall and cannot be extended. At the same time, it is more stable and will stay still while you are typing.
- Safe Wall Mount on Wood Stud Wall / Concrete Brick Wall - To keep your expensive device safe and stable, we would suggest you mount the monitor on the Wood Stud Wall / Concrete Brick Wall. Please Do Not install into drywall alone.
- Wall mount LCD arm adjusts effortlessly for ease of use
- Arm extends and retracts, tilts to change reading angles, and rotates from landscape-to-portrait mode
- Increases desktop space; allows ergonomic positioning for reduced strain
- Built to hold monitor from 5lbs to 25lbs (2.3~11.3kg)
- Easy set up; instructions and hardware included
- MORE STABLE THAN DESKT MOUNT- This single monitor stand is mounted on the wall, it is more stable than desk monitor stand and will not damage your expensive desk. the monitor riser is easy to install in 10 minutes or less so you can get focused and start working right away
- COMPATIBLE WITH MOST VESA SIZES - Our HUANUO single wall monitor mount comes with a VESA extension kit that fits most 17" to 32" monitors/TVs weighing up to 17.6lbs. Compatible with VESA sizes 75mm x75mm, 100mm x 100mm, 200mm x 100mm and 200mm x 200mm
- ADVANCED PNEUMATIC SPRING SYSTEM - The internal counterbalance gas spring adjusts to the weight of your monitor creating a suspended free-float effect, that allows to adjust monitor height more smoothly.(adjust it according to your monitor weight before use)
- FULL MOTION ADJUSTABLE MONITOR STAND - Adjustable arm offers -35° to +35° tilt, 180° swivel, 360° rotation. The arm can be extended up to 18.3"(to the wall) supporting you a more optimal viewing angle, helps to reduce the pain in your neck, shoulders, and back
- EASY INSTALLATION - All necessary hardware and instructions are provided for assembly, and mounting your monitor is a simple process. The monitor stand holds weights up to 17.6 lbs.
- Compatibility: Fits Monitors up to 27". VESA 75x75mm or 100x100mm detachable. Heavy-duty wall plate is integrated with both brick wall and wood wall.
- Sturdy Construction: The high-grade material gas spring arm can be extended 21.2" and retracted, +75°/-45° tilt and +90°/-90° swivel to change reading angles, and 360° rotate from landscape to portrait mode.
- Double Benefits: Double efficiency and productivity by opening up desk space allowing the new range of adaptable positions for your displays.
- Dynamic: Our monitor arm is easily adjustable, allowing you to work in a more comfortable, ergonomically correct position to reduce neck and eye strain.
- Package Includes: 1 x WALI Gas Spring Single Monitor Wall Mount (Black), 1 x Mounting Hardware Kit, 1 x User Manual, 10 Year Protection.
- Compatibility: Full motion heavy duty wall mount for most 13 to 30 inches flat panel display up to 33lbs, with VESA 75x75mm to 100x100mm. Detail: 75x75mm(3”x3”),100x100mm(4”x4”).
- Fully Adjustable: +/-15 degrees tilt; 180 degrees swivel and 360 degrees rotate for better-viewing flexibility.
- Space Save: Places TV just 2 inches from the wall to enhance the look of ultra-thin LED TV. Extends up to 15" from the wall for the space saving.
- Installation: 5.9” X 1.6” wall plate can be mounted on any vertical wood studs, brick, or concrete wall (Do NOT mount on drywall alone).
- Package Includes: 1 x WALI Articulating Wall Mount, Mounting Hardware Kit, User Manual, 10 Year Protection
- Counter-Balance Wall Mount - Clear up valuable desk space with a deluxe extended gas spring arm wall mount. Features tool-less, instant height adjustment, allowing you to find the perfect ergonomic viewing level
- Compatibility - Fits VESA 75x75mm or 100x100mm and holds one computer monitor 17" to 27" (under 19.8 pounds)
- Articulating Arm - +90 degree to -45 degree tilt and 90 degree swivel motion allow for a variety of viewing angles
- Easy Installation - Necessary mounting hardware such as mounting screws, anchors, washers, and VESA bolts are included, as well as cable management to keep cords out of sight and organized
- We've Got You Covered - Sturdy steel design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns.
- Raise your monitor to an ergonomic height, relieving the strain of the neck and shoulder and enhancing work efficiency.
- Instead mounted on the desktop, this dual arm monitor wall mount hold your monitor on the wall, free up much valuable space on your workstation.
- Fit Your Monitors 17 to 27 inch flat / curved monitors weighing from 0 to 17.6lbs, compatible with VESA 75x75 and 100x100.
- This full motion articulating monitor arm allows your monitor tilt, swivel and rotate to find an optimal view angle; the built-in gas spring make the height adjustments more smooth.
- All the necessary instruction and hardware included; HUANUO tech support is always ready for help, welcome to your inquiry.
- Horizontal Dual Adapter Arm: Converts a single monitor mount into a dual monitor mount using the middle VESA plate, which has mounting bolt holes in both a 75mm and 100mm pattern. Comes with cable management clips to keep your cords organized. See video for installation and functionality tips.
- Dual Monitor Wall Mount: It can also be used as a wall mount for 2 computer screens 13 15 17 19 21.5 24 27 inches in size that use the VESA 75mm or 100mm bolt hole patterns located on the back of the monitor (measure the distance between bolt holes with a ruler, in millimeters, if unsure of size). Does not include wall anchors.
- Functionality: When on a desk stand, monitors will tilt 45 degrees up and 45 degrees down, swivel 15 degrees left and right, and both monitors can rotate and be held in either landscape or portrait orientation. Please note: Against a wall, tilt and swivel function will be more limited.
- Heavy Duty: Each VESA head can hold displays up to 11 pounds each, and original single mount must be able to withstand the added weight as well. Steel construction and scratch-resistant black powder coating will stand the test of time.
- 5-Year Warranty: Comes with a 5-year warranty and our friendly, US-based customer service team would be happy to answer any questions you may have during normal business hours.
- UNIVERSAL TV COMPUTER MONITOR WALL MOUNT ARM: Fits all screens up to 32 inches and 14.3 pounds with 75x75mm or 100x100mm VESA square bolt hole patterns, which are found on the back of your tv / monitor (if unsure of size, measure distance between bolt holes in millimeters).
- FEATURES: Wall monitor mount is counterbalanced with gas spring arms which make for effortless adjustment and comes with integrated, hide-away cable management. Sturdy steel construction will stand the test of time and the rigors of the road if used in a camper or RV.
- FULLY ADJUSTABLE: Single VESA wall mount can tilt, swivel, raise and/lower - and screen has 360 degree rotation. Turn hex bolt on top of computer monitor arm to adjust the gas spring tension to hold screens in place (please see 5th image down or instructional video for reference).
- EASY INSTALLATION: Wall mount monitor arm comes with all mounting hardware (anchors included! ), tools, and instructions necessary for assembly. Needs a single stud for mounting and quick attachment VESA plate gets screwed into the back of the screen, then slips onto the arm in seconds. See instructional video for additional tips on functionality and assembly. Key Product Features
- US-BASED CUSTOMER SUPPORT: Our friendly and responsive customer support team is available to answer any questions you may have and mount comes with a 5-YEAR .
Our Best Choice: Mount-It! Dual Monitor Wall Mount | Single to Double Horizontal Arm Monitor Converter Adapter Bracket | VESA 75 100 Compatible | Fits 2 x 19 21.5 24 27 Inch Computer Screens
Mount-It! Dual Keep an eye on Adapter, Change Your One Observe To Dual Check VESA Mount, Suits Two 22, 24, 25, 27 Inch Monitors
This twin observe adaptor is designed to switch your present workspace into a twin watch set up. Enhance your productivity and increase your workflow basically by attaching this adaptor to the mount you at the moment use or mount it immediately to the wall previously mentioned your desk. You are going to be savoring the added benefits of a dual keep an eye on workspace in no time.
This adaptor suits any VESA 75x75mm or 100x100mm observe mounts and has the ability to fit 13-27 inch displays aspect by aspect. Its sturdy metal development features a bodyweight capacity of 22 lbs.
Its comprehensive movement design incorporates a 360-degree mount rotation that enables you to use your monitors in landscape or portrait method. It also options a total tilting functionality, allowing for you to tilt your observe to cut down glare and improve viewing.
The somewhat curved style makes an immersive widescreen encounter and helps make viewing a lot more pleasant. Also capabilities integrated cable management hooks to maintain individuals cables out of sight and structured.
Functions and Requirements
Turns your latest workspace into a dual observe setup
Improve productiveness and workflow with double the display screen place
Entire Motion design and style: 360 degree keep track of rotation and full tilt
Built-in cable administration hooks
Matches 13-27 inch displays sided by aspect
22 lb excess weight potential
Good metal building
Curved structure for an immersive widescreen practical experience
Fits VESA 75x75mm and 100x100mm
Horizontal Dual Adapter Arm: Converts a single keep an eye on mount into a twin watch mount applying the middle VESA plate, which has mounting bolt holes in each a 75mm and 100mm pattern. Will come with cable management clips to maintain your cords organized. See video for set up and operation recommendations.
Twin Watch Wall Mount: It can also be applied as a wall mount for 2 computer system screens 13 15 17 19 21.5 24 27 inches in dimension that use the VESA 75mm or 100mm bolt hole designs positioned on the back of the keep an eye on (evaluate the length involving bolt holes with a ruler, in millimeters, if doubtful of measurement). Does not involve wall anchors.
Operation: When on a desk stand, displays will tilt 45 degrees up and 45 degrees down, swivel 15 levels left and proper, and each displays can rotate and be held in both landscape or portrait orientation. Make sure you observe: Towards a wall, tilt and swivel perform will be additional constrained.
Heavy Responsibility: Every single VESA head can keep displays up to 11 lbs . each, and authentic solitary mount have to be equipped to face up to the additional fat as nicely. Steel building and scratch-resistant black powder coating will stand the take a look at of time.
5-12 months Guarantee: Comes with a 5-yr warranty and our welcoming, US-primarily based purchaser services workforce would be content to remedy any questions you may perhaps have during regular business hrs.